小型パワーユニット

• Our standard Ac motors from 0.25HP to 3.0HP.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 1.0L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available

• Standard frame sizes range from 63M to 112M.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 1.0L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available

• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 1.0L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available.

• DC motors range from 0.55KW to 3.0KW; as well as DC 12 and 24 volts.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 1.0L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available.

• Our standard AC motors range from 0.25HP to 3.0HP.
• Tank sizes vary from 0.5L to 1.7L.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.

• Standard frame sizes range from 63M to 112M.
• Tank sizes vary from 0.5L to 1.7L.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.

• Tank sizes vary from 0.5L to 1.7L.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.

• DC motors range from 0.55KW to 3.0KW;as well as DC 12 and 24 volts.
• Tank sizes vary from 0.5L to 1.7L.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.

• The W82A power pack can be modified to fit a wide range of tank sizes,
  pump capacities and hydraulic circuits to accommodate your specific application.
• Complete operating instructions for our high performance system is provided with each W82A power pack.
• All screw-in cartridge valves have been designed to be adjusted easily to service the power pack quickly.
• In addition to Winner standard AC motors, NEMA and B14 standard motors can also be used for the W82A power pack.
  
  

The W83A series power pack is designed for applications that need high pressure and larger flow, but use a low-power A.C. motor. The power pack uses a special manifold(W800553).

All screw-in cartridge valves have been designed to be adjusted easily to service the power pack quickly. They still have the same dimensions and functions as the standard manifold (W800532).

• Our standard Ac motors from 0.25HP to 3.0HP.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W83AB series power pack is designed for applications that need high pressure and larger flow, but use a low-power B14 Frame motor. The power pack uses a special manifold (W800553). All screw-in cartridge valves have been designed to be adjusted easily to service the power pack quickly. They still have the same dimensions and functions as the standard manifold (W800532).

• Standard frame sizes from 63M to 112M.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W83BT series power pack is designed for applications that need high pressure and larger flow, but use a customer supplied low-power transmission. The power pack uses a special manifold (W800553). All screw-in cartridge valves have been designed to be adjusted easily to service the power pack quickly. They still have the same dimensions and functions as the standard manifold (W800532).

• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W83D series power pack is designed for applications that need high pressure and larger flow, but use a low-power D.C. motor. The power pack uses a special manifold (W800553). All screw-in cartridge valves have been designed to be adjusted easily to service the power pack quickly. They still have the same dimensions and functions as the standard manifold (W800532).

• DC motors from 0.55KW to 3.0KW;as well as DC 12 and 24 volts.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W84A series power pack is designed for applications that need high pressure and larger flow, but use a low-power A.C. motor. Because the power pack uses standard manifold(W800532), they will have the same functions as the W80A series power pack.

• Our standard Ac motors from 0.25HP to 3.0HP.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W84AB series power pack is designed for applications that need high pressure and larger flow, but use a low-power B14 Frame motor. Because the power pack uses a standard manifold(W800532), they will have the same functions as the W80AB series power pack.

• Standard frame sizes range from 63M to 112M.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W84BT series power pack is designed for applications that need high pressure and larger flow, but use a customer low-power transmission. Because the power pack uses a standard manifold(W800532), they will have the same functions as the W80BT series power pack.

• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W84D series power pack is designed for applications that need high pressure and larger flow, but use a low-power D.C. motor. Because the power pack uses a standard manifold(W800532), they will have the same functions as the W80D series power pack.

• DC motor from 0.55KW to 3.0KW;as well as DC 12 and 24 volts.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W85A series power pack is designed for applications that need two independent hydraulic power supply, but use a single A. C. motor.

• Our standard Ac motors from 0.25HP to 3.0HP.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available.

The W85AB series power pack is designed for applications that need two independent hydraulic power supply, but use a single B14 Frame motor.

• Standard frame size range from 63M to 112M.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available.

The W85BT series power pack is designed for applications that need two independent hydraulic power supply, but only use a single transmission.

• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available.