製品情報

The W83BT series power pack is designed for applications that need high pressure and larger flow, but use a customer supplied low-power transmission. The power pack uses a special manifold (W800553). All screw-in cartridge valves have been designed to be adjusted easily to service the power pack quickly. They still have the same dimensions and functions as the standard manifold (W800532).

• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W83D series power pack is designed for applications that need high pressure and larger flow, but use a low-power D.C. motor. The power pack uses a special manifold (W800553). All screw-in cartridge valves have been designed to be adjusted easily to service the power pack quickly. They still have the same dimensions and functions as the standard manifold (W800532).

• DC motors from 0.55KW to 3.0KW;as well as DC 12 and 24 volts.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W84A series power pack is designed for applications that need high pressure and larger flow, but use a low-power A.C. motor. Because the power pack uses standard manifold(W800532), they will have the same functions as the W80A series power pack.

• Our standard Ac motors from 0.25HP to 3.0HP.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W84AB series power pack is designed for applications that need high pressure and larger flow, but use a low-power B14 Frame motor. Because the power pack uses a standard manifold(W800532), they will have the same functions as the W80AB series power pack.

• Standard frame sizes range from 63M to 112M.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W84BT series power pack is designed for applications that need high pressure and larger flow, but use a customer low-power transmission. Because the power pack uses a standard manifold(W800532), they will have the same functions as the W80BT series power pack.

• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W84D series power pack is designed for applications that need high pressure and larger flow, but use a low-power D.C. motor. Because the power pack uses a standard manifold(W800532), they will have the same functions as the W80D series power pack.

• DC motor from 0.55KW to 3.0KW;as well as DC 12 and 24 volts.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L. Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuits are also available.

The W85A series power pack is designed for applications that need two independent hydraulic power supply, but use a single A. C. motor.

• Our standard Ac motors from 0.25HP to 3.0HP.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available.

The W85AB series power pack is designed for applications that need two independent hydraulic power supply, but use a single B14 Frame motor.

• Standard frame size range from 63M to 112M.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available.

The W85BT series power pack is designed for applications that need two independent hydraulic power supply, but only use a single transmission.

• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available.

• The W85D series power pack is designed for applications that need two independent hydraulic power supply, but use a single D.C. motor.
• DC motors from 0.55KW to 3.0KW;as well as DC 12 and 24 volts.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Standard tank sizes vary from 2.4L to 8.0L Tailor made tanks are also available.
• Hydraulic circuit valves can be inter-changed with the standard manifold.

Custom made circuit are also available.

The W87A series power pack is designed for a wide range of applications which include

• Our standard Ac motors from 0.25HP to 3.0HP.
• Tank sizes vary from 0.5L to 1.7L.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Options: Handle pump; Hi-Low speed lowering solenoid valves; Adjustable output flow; By-Pass solenoid valve.

The purpose for the mini design is to save space.

The power pack is only 152mm by 152mm.

If you have any questions or need a custom design, please feel free to contact us.

      The W87D series power pack is designed for a wide range of applications which include

• DC motors range from 0.55KW to 3.0KW; as well as DC 12 and 24 volts.
• Tank sizes vary from 0.5L to 1.7L.
• Pump capacity range is from 0.5cc/rev to 7.3cc/rev.
• Options: Handle pump; Hi-Low speed lowering solenoid valves; Adjustable output flow; By-Pass solenoid valve.

      The purpose for the mini design is to save space.

      The power pack is only 152mm by 152mm.

      If you have any questions or need a custom design, please feel free to contact us.

The TG-168 series power pack is designed for "Tail-Gate of the truck" application, which includes the unit and complete components of a power protecting cover, therefore users just need to connect the fittings and control wires.

• Easy to install and service.
• Saves space and costs.
• High quality and quick delivery.

The WL-214 series power pack is designed for "Wheel-Chair or Cargo Lift" application, which include unit and complete components of a power protecting cover, therefore users just need to connect the fittings and control wires.

• Easy to install and service.
• Saves space and costs.
• High quality and quick delivery.

The SBT series power pack is designed for various engines with horizontal drive.
These power packs are designed mostly for agricultural use ,and can be used in other fields

The SBT series power pack is designed for various engines with horizontal drive.
These power packs are designed mostly for agricultural use ,and can be used in other fields.