カートリッジ弁
  • 技術データ
  • 製品説明
  • 性能曲線
  • 技術リファレンス
  • ファイル

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 10W-2
Rated Flow 10.57 gpm 40 L/min
Maximum Operating Pressure 5000 psi 350 bar
Valve Hex Size 1 in. 25.4 mm
Valve Installation Torque 26 - 33 lbf-ft 35 - 45 Nm
Adjustment Screw Internal Hex Size 5/32 in. 4 mm
Locknut Hex Size 9/16 in. 14.27 mm
Locknut Torque 6 - 7 lbf-ft 9 - 10 Nm
Weight 0.4 lbs (Z=L) 0.18 kg (Z=L)
This is a direct-operated, spool-type, pressure-compensated flow control valve. This valve maintains a constant flow from port 1 to port 2 based on the setting adjustment, regardless of load pressure changes, the regulated flow increases with clockwise rotation of the adjusting screw. Reverse flow from port 2 to port 1 is limited by the diameter of the selected control orifice and is not pressure-compensated.

  • The flow rate depends on the selected flow range. If different factory set flow ratings are required, please contact the Winner sales department.
  • Fast and smooth response to load changes
  • Excellent stability throughout the entire flow range.
  • Working parts are heat-treated and high-precision ground to increase hardness for long life.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.