カートリッジ弁
  • 技術データ
  • 製品説明
  • 性能曲線
  • 技術リファレンス
  • ファイル

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 08W-2
Rated Flow 3.17 gpm 12 L/min
Maximum Pressure 3400 psi 240 bar
Valve Hex Size 15/16 in. 24 mm
Valve Installation Torque 18 - 26 lbf-ft 25 - 35 Nm
Adjustment Screw Internal Hex Size 5/32 in. 4 mm
Locknut Hex Size 9/16 in. 14.27 lbf-ft
Locknut Torque 6 - 7 lbf-ft 9 - 10 Nm
Weight 0.22 lbs (Z=L), 0.15 lbs (Z=N) 0.1 kg (Z=L), 0.07kg (Z=N)
This is a direct-operated, spool type, fixed orifice, pressure-compensated flow control valve. Regardless of load pressure changes, the valve maintains a constant flow from port 1 to port 2. Reverse flow from port 2 to port 1 is limited by the diameter of the selected control orifice and is not pressure-compensated.

  • Accurate pressure-compensated control requires that a 5.5 bar (80 psi)(approx.) pressure differential be maintained across the valve.
  • Flow setting (configuration Y) must be specified when ordering
  • Factory-set flow ratings are within ±10% of the requested setting.
  • If specific flow accuracy is needed, please contact Winner’s sales department.
  • Working parts are heat-treated and high-precision ground to increase hardness for long life.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.