Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity |
18A-2 (18AB-2) |
| Rated Flow |
137.37 gpm
520 L/min |
| Maximum Operating Pressure |
5000 psi
350 bar |
| Valve Hex Size |
1-5/8 in.
41.2 mm |
| Valve Installation Torque |
343 - 369 lbf-ft
465 - 500 Nm |
| Adjustment Screw Internal Hex Size |
5/32 in.
4 mm |
| Locknut Hex Size |
9/16 in.
14.27 mm |
| Locknut Torque |
6 - 7 lbf-ft
9 - 10 Nm |
| Weight |
2.73 lbs (Z=L)
1.24 kg (Z=L) |
This is a direct-operated, fully adjustable needle flow control valve. This valve maintains a constant flow from port 1 to port 2 or from port 2 to port 1 based on the adjustment setting. It is not pressure-compensated.
-
The rated flow is a reference value, actual flow depends on the pressure drop.
-
Based on the same cavity, this valve is suitable for high flow applications. Turn completely clockwise to fully close.
-
A variety of seal kit materials for different applications, see seals information under Technical Reference.
-
Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is “90/90”.
-
WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
-
Winner guarantees that all products performance a 100% functional test before shipment.
