カートリッジ弁
  • 技術データ
  • 製品説明
  • 性能曲線
  • 技術リファレンス
  • ファイル

Note: Data may vary by configuration. See CONFIGURATION section.

Rated Flow 1.06 - 6.6 gpm 4 - 25 L/min
Maximum Pressure 5000 psi 350 bar
Tightening Torque 1.75 ± 0.74 lbf-ft 2 ± 1 Nm
Weight 1.54 lbs 0.07 kg
Filtration 25µm nominal or better
The valve is only supposed to be operated in case of hose failure. In the event of a hose failure, flow increases across the valve until the maximum safe limit is reached, at which point the valve will close. These valves can be supplied (on request) with an orifice in the washer, ensuring a slow descent of the load with valve in closed position. 

  • Special flow settings can be specified when ordering. Please contact the Winner sales department to customize the factory settings.
  • Hose burst valves are designed for integration into cylinders, lines, and control blocks.
  • Winner offers a variety of flow rate settings to meet your specific needs. Once installed, these settings are secure and cannot be adjusted without authorization, ensuring reliability and safety in your operations.A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.