カートリッジ弁
  • 技術データ
  • 製品説明
  • 性能曲線
  • アプリケーション例
  • 技術リファレンス
  • ファイル

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 10W-3
Rated Flow 10.57 gpm 40 L/min
Maximum Operating Pressure 3400 psi 240 bar
Maximum Leakage Approximately 60 cc/min at 3000 psi 60 cc/min at 210 bar
Valve Hex Size 1 in. 25.4 mm
Valve Installation Torque 26 - 33 lbf-ft 35 - 45 Nm
Weight 0.33 lbs 0.15 kg
This is a spool-type, normally open, pressure-compensated logic element valve. The valve maintains a constant pressure differential across the control orifice to provide a steady flow rate. The valve allows flow from port 3 to port 2, with the spring chamber vented to port 3. When pilot pressure is applied at port 1, the spool shifts to block flow between port 2 and port 3. Pressure at port 3 adds directly to the valve setting at a 1:1 ratio.
 
  • Working parts are heat-treated and high-precision ground to increase hardness for long life.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is “90/90”.
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.