カートリッジ弁
  • 技術データ
  • 製品説明
  • 性能曲線
  • 技術リファレンス
  • ファイル

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 11A-3
Rated Flow 25.1 gpm 95 L/min
Maximum Operating Pressure 5000 psi 350 bar
Valve Hex Size 7/8 in. 22.22 mm
Valve Installation Torque 30 - 37 lbf-ft 40 - 50 Nm
Adjustment Screw Internal Hex Size 5/32 in. 4 mm
Locknut Hex Size 9/16 in. 14.27 mm
Locknut Torque 6 - 7 lbf-ft 9 - 10 Nm
Weight 0.29 lbs (Z=N), 0.35 lbs (Z=L) 0.13 kg (Z=N), 0.16 kg (Z=L)
This is an unbalanced poppet logic element valve, spring-biased to closed. Port 1 serves as the pilot source. The opening and closing of the poppet are dependent on the force balances on the areas of the poppet at port 1, port 2 and port 3. If port 3 is blocked, the valve remains closed (port 1 to port 2 closed), acting as a check valve allowing flow from port 2 to port 1. When port 3 is vented, the valve will open if sufficient pressure is applied to overcome the spring force. To keep the valve closed, the combined force (force generated at port 3 plus spring force) must exceed the forces at port 1 and port 2.

  • All ports can withstand up to 350 bar (5000 psi).
  • Area ratio of A3 to A1 is 1.8:1.
  • Area ratio of A3 to A1 is 2.25:1.
  • Working parts are heat-treated and high-precision ground to increase hardness for long life.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.