カートリッジ弁
  • 技術データ
  • 製品説明
  • ファイル

Note: Data may vary by configuration. See CONFIGURATION section.

Supply Voltage 10 - 35 VDC
Maximum Current 0 - 2600 mA adjustable for 12 and 24 VDC
Minimum Current 0 - 600 mA adjustable
Ramp Adjustment (Up/ Down) 0 - 5 Sec.
Dither Frequency 40 - 300 Hz adjustable
Ambient Operating Temperature -20 - 40°C (-4 - 104°F)
Weight 0.11 lbs 0.05 kg
A proportional amplifier PCB-2600 is a device that converts an input signal into a corresponding control current, it is used for proportional solenoid valve. The voltage range widely from 10 to 35 V DC. The amplifier can be used in both mobile and stationary system. For requirements involving adjustable differential frequency, please refer to the PCB-2600C.

  • Do not remove the amplifier from the coil while the power is on. Doing so may damage the internal circuits of the amplifier, resulting in a loss of output to the coil.
  • RAMP: Adjust the ramp-up and ramp-down times. To increase ramping times, turn the potentiometers clockwise; to decrease ramping times, turn the potentiometers counterclockwise.
  • I max./ I min.: Multi-turn potentiometers are available for adjusting the minimum and maximum settings, as well as ramp times.
  • Frequency Adjustment: The dither frequency can be set with a jumper to 85, 140, or 300 Hz. For other frequency options or custom adjustment requirements, please contact the Winner sales department.