カートリッジ弁
  • 技術データ
  • 製品説明
  • 性能曲線
  • 技術リファレンス
  • ファイル

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 11A-3
Rated Flow 10.57 gpm 40 L/min
Maximum Operaing Pressue 5000 psi 350 bar
Maximum Leakage Approximately (VG32, 40°C) 10 cc/min at 1000 psi 30 cc/min at 70 bar
Valve Hex Size 7/8 in. 22.22 mm
Valve Installation Torque 30 - 37 lbf-ft 40 - 50 Nm
Adjustment Screw Internal Hex Size 5/32 in. 4 mm
Locknut Hex Size 9/16 in. 14.27 mm
Locknut Torque 6 - 7 lbf-ft 9 - 10 Nm
Weight 0.42 lbs (Z=L) 0.19 kg (Z=L)
This is a direct-acting, spool-type reducing/relieving valve, suitable for low flow rates and lower regulated pressures. It allows bi-directional flow between port 2 and port 1. When the pressure at port 1 exceeds the predetermined level, the spool shifts to restrict flow at port 2, regulating the pressure at port 1. If the pressure at port 1 continues to rise above the valve setting, the spool shifts further to relieve excess pressure through port 3 (tank) until the set pressure is restored. 

  • This valve features a direct-acting design with low leakage, making it suitable for accumulator and brake circuits.
  • The inlet pressure of all spring specifications is up to 350 bar (5000 psi).
  • Pressure at port 3 adds directly to the valve setting at a 1:1 ratio.
  • Working parts are heat-treated and high-precision ground to increase hardness for long life.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.