カートリッジ弁
  • 技術データ
  • 製品説明
  • 性能曲線
  • 技術リファレンス
  • ファイル

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 08W-3
Rated Flow 3.17 gpm 12 L/min
Maximum Operating Pressure 3400 psi 240 bar
Maximum Leakage 80 cc/min
Valve Hex Size 1 in. 25.4 mm
Valve Installation Torque 18 - 26 lbf-ft 25 - 35 Nm
Adjustment Screw Internal Hex Size 5/32 in. 4 mm
Locknut Hex Size 9/16 in. 14.27 mm
Locknut Torque 6 - 7 lbf-ft 9 - 10 Nm
Weight 0.46 lbs (Z=L) 0.21 kg (Z=L)
This is a direct-acting, spool-type reducing/relieving valve, suitable for low flow rates and lower regulated pressures. It allows bi-directional flow between port 2 and port 1. When the pressure at port 1 exceeds the predetermined level, the spool shifts to restrict flow at port 2, regulating the pressure at port 1. If the pressure at port 1 continues to rise above the valve setting, the spool shifts further to relieve excess pressure through port 3 (tank) until the set pressure is restored. 

  • This valve features a direct-acting design with low leakage, making it suitable for accumulator and brake circuits.
  • The inlet pressure of all spring specifications is up to 350 bar (5000 psi).
  • Pressure at port 3 adds directly to the valve setting at a 1:1 ratio.
  • Working parts are heat-treated and high-precision ground to increase hardness for long life.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.