カートリッジ弁
  • 技術データ
  • 製品説明
  • 性能曲線
  • 技術リファレンス
  • ファイル

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 30R-2
Rated Flow 31.7 gpm 120 L/min
Maximum Operating Pressure 5000 psi 350 bar
Valve Hex Size 1-3/16 in. 30 mm
Valve Installation Torque 44 - 52 lbf-ft 60 - 70 Nm
Maximum Leakage Approximately 5 drops/min to 85% of nominal setting
Weight 0.46 lbs 0.21 kg
This is a direct-acting, guided poppet, fixed setting relief valve intended for use as a pressure-limiting device to protect hydraulic systems from pressure transients. The valve blocks flow from port 1 to port 2 until the pressure at port 1 is sufficient to overcome the predetermined setting, it lifts the poppet and opens the flow path from port 1 to port 2. It offers quick response to load changes in hydraulic circuits requiring low internal leakage.

  • The maximum leakage is approximately 5 drops/min to 85% of nominal setting.
  • Back pressure at port 2 (tank port) is added directly to the valve setting in a 1:1 ratio.
  • Excellent stability throughout flow range with fast response to dynamic pressure changes
  • Working parts are heat-treated and high-precision ground to increase hardness for long life.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.