カートリッジ弁
  • 技術データ
  • 製品説明
  • 性能曲線
  • 関連製品
  • 技術リファレンス
  • ファイル

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 2A-3
Rated Flow 25.1 gpm 95 L/min
Maximum Operating Pressure 5000 psi 350 bar
Valve Hex Size 1-1/8 in. 28.57 mm
Valve Installation Torque 44 - 52 lbf-ft 60 - 70 Nm
Adjustment Screw Internal Hex Size 5/32 in. 4 mm
Locknut Hex Size 9/16 in. 14.27 mm
Locknut Torque 6 - 7 lbf-ft 9 - 10 Nm
Response Time-Typical 2 ms
Maximum Leakage Approximately 0.7 cc/min at 1000 psi 0.7 cc/min at 70 bar
Weight 0.64 lbs (Z=L) 0.29 kg (Z=L)
This is a pilot-operated, poppet-type, ventable relief valve. It blocks flow from port 1 to port 2 until sufficient pressure is applied to port 1 to pilot-open the spool, allowing a flow path from port 1 to port 2. This flow through the vent causes a pressure imbalance, opening the main section and dumping the pump at minimum pressure drop. The valve includes a vent port (port 3) that connects the main piston to the pilot stage, allowing remote control in pump unloading application by other pilot valves, 2-way valves, proportional relief valves (PRB8A) and other valves. This valve features accurate pressure control, a rugged poppet design, very low leakage, quiet operation, and fast response. It is suitable for anti-cavitation applications.

  • This valve features a balanced poppet design to reduce cavitation and manifold erosion during high pressure drop applications.
  • The maximum leakage is approximately 0.7 cc/min at 70 bar (1000 psi).
  • Back pressure at port 2 (tank port) is added directly to the valve setting in a 1:1 ratio.
  • Working parts are heat-treated and high-precision ground to increase hardness for long life.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment. 
 
Pilot Capacity Proportioanl Relief Valve (direct acting) 
PRB-8A-2D-Y-Z
PRB-8A-2C-Y-Z