Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity |
20MC-2 |
| Rated Flow |
7.93 gpm
30 L/min |
| Maximum Operating Pressure |
5000 psi
350 bar |
| Valve Hex Size |
15/16 in.
24 mm |
| Valve Installation Torque |
29 - 38 lbf-ft
39 - 51 Nm |
| Adjustment Screw Internal Hex Size |
5/32 in.
4 mm |
| Locknut Hex Size |
1/2 in.
13 mm |
| Locknut Torque |
6 - 7 lbf-ft
9 - 10 Nm |
| Weight |
0.18 lbs (Z=L)
0.08 kg (Z=L) |
This valve is direct-operated, fully adjustable needle flow control valve with reverse flow check. Output flow can be varied from fully closed to the maximum orifice diameter. Flow is non-pressure-compensated. Free flow is allowed from port 2 to port 1, regardless of valve adjustment, by when pressure overcomes the spring bias of the valve check function.
-
The rated flow is a reference value, actual flow depends on the pressure drop.
-
Working parts are heat-treated and high-precision ground to increase hardness for long life.
-
A variety of seal kit materials for different applications, see seals information under Technical Reference.
-
Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is “90/90”.
-
WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
-
Winner guarantees that all products performance a 100% functional test before shipment.
