Cartridge Valves
  • Technical Data
  • Product Description
  • Performance Curve
  • Technical Reference
  • Files

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 162A-2
Rated Flow 0.53 - 2.25 gpm 2 - 8.5 L/min
Maximum Operating Pressure 5000 psi 350 bar
Valve Hex Size 3/4 in. 19.05 mm
Valve Installation Torque 20 - 22 lbf-ft 27 - 33 Nm
Weight 0.15 lbs 0.07 kg
The hose burst protection valve is designed to secure the position of a hydraulic actuator in the event of a hose or line failure. This valve permits normal flow to and from the actuator but immediately shuts off if the flow from the actuator surpasses the valve's predetermined pressure. Please note that the valve is designed with a highly responsive mechanism, making it particularly sensitive to any transient flow that surpasses its configured setting.

  • Factory set flow ratings are within ±15/% of the requested setting.
  • The flow setting has to be at least 25% bigger than the maximum flow of customer’s system, customer must specify the flow setting when ordering the valve, our recommendation is 1.5 times of normal using flow.
  • Hose burst valves are designed for integration into cylinders, lines, and control blocks.
  • Winner offers a variety of flow rate settings to meet your specific needs. Once installed, these settings are secure and cannot be adjusted without authorization, ensuring reliability and safety in your operations.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.