Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity |
19A-3 (19AB-3) |
| Rated Flow |
126.8 gpm
480 L/min |
| Maximum Operating Pressure |
5000 psi
350 bar |
| Valve Hex Size |
1-5/8 in.
41.2 mm |
| Valve Installation Torque |
343 - 369 lbf-ft
465 - 500 Nm |
| Weight |
2.62 lbs
1.19 kg |
This is a spool-type, normally closed, modulating logic element valve.
Model X=30 is designed without an internal orifice, it can be used as a bypass compensator or switching element. When pressure at port 1 exceeds spring bias, the spool shifts to allow flow from port 1 to port 2. Pilot pressure at port 3 adds directly to the valve setting at a 1:1 ratio. Features high accuracy.
Model X=31 is designed with an internal orifice between port 1 and port 3. When pressure at port 1 exceeds spring bias, the spool shifts to allow flow from port 1 to port 2. The differential pressure between port 1 and port 3 adds directly to the valve setting. The flow from port 3 to port 1 is restricted by the internal orifice. This valve can serve as a main-stage relief element, allowing remote control when paired with a pilot relief valve or pilot solenoid valve.
- Working parts are heat-treated and high-precision ground to increase hardness for long life.
- A variety of seal kit materials for different applications, see seals information under Technical Reference.
- Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is “90/90”.
- WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
- Winner guarantees that all products performance a 100% functional test before shipment.
