Note: Data may vary by configuration. See CONFIGURATION section.

• Configuration Z=R Type: Turn the knob clockwise to achieve the override function. The knob will automatically return to the starting position when released.
• Configuration Z=RA Type: Turn the knob counterclockwise to the locked (fixed) position to achieve the override function. Turn the knob clockwise to release, and the knob will return to the starting position.
• Configuration Z=RB Type: This configuration combines the operations of the R type and RA type to achieve the override function by turning the knob either clockwise or counterclockwise. Please refer to the R type and RA type instructions.
• Note: These operations are for emergency use only and are not intended for load-holding applications.
• Working parts are heat-treated and high-precision ground to increase hardness for long life.
• A variety of seal kit materials for different applications, see seals information under Technical Reference.
• Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is “90/90”.
• WINNERcoat^® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
• Winner guarantees that all products performance a 100% functional test before shipment.

• Directional Valve Manual Override Knob Instruction
• Hydraulic Fluid Viscosity
• Hydraulic Fluid Cleanliness
• Hydraulic Fluid Temperature
• Cartridge Valve Warranty Information
• Technical Data Statement
• Fatigue and Burst Pressure Test Standard
• Orifice vs. Pressure Drop Curves Chart
• Note of Valves Assembling and Disassembling in Ductile Manifolds
• Calculate of Pipe Diameter

• Two Ways to Order "Seal Kits"
• Cartridge Valve Seal Material Configuration