Note: Data may vary by configuration. See CONFIGURATION section.
Cavity |
5A-2 |
Rated Flow |
21.13 gpm
80 L/min |
Maximum Operating Pressure |
5000 psi
350 bar |
Valve Hex Size |
1-1/8 in.
28.57 mm |
Valve Installation Torque |
44 - 52 lbf-ft
60 - 70 Nm |
Coil |
EC-23C |
Linearity (with dither) |
< 2% |
Repeatibility (with dither) |
< 2% |
Hysteresis (with dither) |
< 4% |
Hysteresis with DC Input |
< 8% |
Deadband, nominal (as a percentage of input) |
25% |
Weight |
1.57 lbs (with coil), 0.79 lbs (without coil)
0.71 kg (with coil), 0.36 kg (without coil) |
This is a direct-operated, spool-type, normally closed electro-proportional flow control valve. When de-energized, the valve is closed with a spring-bias spool. When energized, the current proportionally opens the spool to control the metered flow from port 1 to port 2. When the pressure drop is higher, this valve performs self-compensation from port 1 to port 2. Direction in port 2 to port 1 is not pressure-compensated.
If you need precise flow proportional control (port 1 to port 2 or port 2 to port1), we recommend using with Winner's full series of compensators.
-
Coils must be ordered separately. For voltage information, please consult our sales department.
-
Continuous-duty rated coil.
-
Efficient wet-armature construction.
-
Working parts are heat-treated and high-precision ground to increase hardness for long life.
-
A variety of seal kit materials for different applications, see seals information under Technical Reference.
-
Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
-
WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
-
Winner guarantees that all products performance a 100% functional test before shipment.