Cartridge Valves
  • Technical Data
  • Product Description
  • Performance Curve
  • Application Example
  • Technical Reference
  • Files

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 11A-3
Rated Flow 15.85 gpm 60 L/min
Maximum Operating Pressure 3000 psi 210 bar
Pilot ratio 28 : 1
Valve Hex Size 7/8 in. 22.22 mm
Valve Installation Torque 30 - 37 lbf-ft 40 - 50 Nm
Locknut Hex Size 9/16 in. 14.27 mm
Locknut Torque 6 - 7 lbf-ft 9 - 10 Nm
Response Time-Typical 10 ms
Maximum Leakage Approximately 30 cc/min at 1000 psi 30 cc/min at 70 bar
Weight 0.3 lbs 0.14 kg
This is a pilot-operated, spool-type, dual pressure setting relief valve. The one-stage setting is for low-pressure relief function (when there is no pilot at port 3), and the valve setting is determined by screw adjustment (customers can ask Winner to predetermine the setting at the factory). The two-stage setting for high-pressure relief function is the maximum spring setting and is non-adjustable; please inform Winner of the predetermined pressure. The pressure at port 3 must exceed 11 bar (Y=A) to move the pilot piston and compress the spring to reach the valve setting.

  • The maximum leakage is approximately 30 cc/min at 70 bar (1000 psi).
  • Working parts are heat-treated and high-precision ground to increase hardness for long life.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.