Solenoid On/Off Valves
  • Technical Data
  • Product Description
  • Performance Curve
  • Technical Reference
  • Files

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 11A-3
Rated Flow 11.89 gpm 45 L/min
Maximum Operating Pressure 5000 psi 350 bar
Response Time Depending on Pressure and Flow On : 30 - 60 ms, Off : 20 - 60 ms
Salt Spray Test to DIN EN ISO 9227:2017-07 Exceed 1000 Hours
Solenoid Valve Hex Size 7/8 in. 22.22 mm
Solenoid Valve Installation Torque 30 - 37 lbf-ft 40 - 50 Nm
Coil Nut Torque 2 - 4 lbf-ft 3 - 5 Nm
Weight 0.6 lbs (Z=P) 0.27 kg (Z=P)
Mounting Position Unrestricted
Coil Type EC-19A
Supply Voltage 90% of nominal
Power Consumption 22W
This is a direct-acting, spool type, 3-way 2-position solenoid valve. When de-energized, flow is allowed from port 3 to port 2 while port 1 is blocked. When energized, it allows flow from port 2 to port 1 and blocks port 3.

  • Continuous-duty rated coil.
  • Efficient wet-armature construction.
  • Spool valves will have normal leakage due to spool clearance. For low leakage applications, please contact the Winner sales department.
  • Working parts are heat-treated and high-precision ground to increase hardness for long life.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is “90/90”. 
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.
Pressure drop curve for ES11A3D15-04 direct-acting, spool-type, 3/2 solenoid valve, showing flow and pressure characteristics                            operating limits curve for the ES11A3D15-04 direct-acting, spool-type, 3/2 solenoid valve, showing how pressure varies with changes in flow rate

The performance curve or data is only for reference, as customers' using condition, pressure, flow, hydraulic fluid viscosity, cleanliness, temperature and so on are different, the curve or data will be different.