Solenoid On/Off Valves
  • Technical Data
  • Product Description
  • Performance Curve
  • Technical Information
  • Files

Note: Data may vary by configuration. See CONFIGURATION section.

Cavity 20M-2
Rated Flow 5.28 gpm 20 L/min
Maximum Operating Pressure 5000 psi 350 bar
Fluid Temperature Range -40 to 248 ℉ -40 to 120 ℃
Maximum Leakage Approximately 0.15 cc/min (3 drops/min) at 5000 psi 0.15 cc/min (3 drops/min) at 350 bar
Salt Spray Test to DIN EN ISO 9227:2017-07 Exceed 1000 Hours
Solenoid Valve Hex Size 15/16 in. 24 mm
Solenoid Valve Installation Torque 29 - 38 lbf-ft 39 - 51 Nm
Locknut Torque 4 - 5 lbf-ft 5 - 7 Nm
Weight 0.44 lbs (Z=N) 0.20 kg (Z=N)
Mounting Position Unrestricted
Coil Type EC-16B
Supply Voltage 90% of nominal
Power Consumption 26W
This is a direct-acting, poppet type, 2-way 2-position, normally open solenoid valve, designed for applications requiring extremely fast response and virtually zero internal leakage. When energized, flow is blocked in both directions, regardless of pressure on port 1 and port 2. When de-energized, it allows flow in both directions.

  • Continuous-duty rated coil.
  • Efficient wet-armature construction.
  • This valve is designed for direct-acting operation without a minimum operating pressure.
  • Working parts are heat-treated and high-precision ground to increase hardness for long life and essentially zero leakage.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is “90/90”.
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.
  • Note: The control option “Z=T” can only be used for emergency or test use. Please keep at the normal operational position after turning counterclockwise. A larger force is required for downward push during high-pressure operations, please contact Winner's sales department.
This is a direct-acting, poppet type, 2-way 2-position, normally open solenoid valve, designed for applications requiring extremely fast response and virtually zero internal leakage. When energized, flow is blocked in both directions independent form pressure on port 1 and port 2. When de-energized, it allows flow in both directions.

  • Continuous-duty rated coil.
  • Efficient wet-armature construction.
  • This valve is designed for direct-acting operation without a minimum operating pressure.
  • Working parts are heat-treated and high-precision ground to increase hardness for long life and essentially zero leakage.
  • A variety of seal kit materials for different applications, see seals information under Technical Reference.
  • Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
  • WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
  • Winner guarantees that all products performance a 100% functional test before shipment.
  • Note: The control option " Z=T " can only be used for emergency or test use. Please keep at the normal operational position after turning counterclockwise. A larger force is required for downward push during high-pressure operations, please contact Winner's sales department.