Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity |
20W-2 (20WB-2) |
| Rated Flow |
25.1 gpm
95 L/min |
| Maximum Operating Pressure |
3800 psi
260 bar |
| Valve Hex Size |
1-1/2 in.
38 mm |
| Valve Installation Torque |
81 - 96 lbf-ft
110 - 130 Nm |
| Maximum Leakage Approximately |
5 drops/min at 3800 psi
5 drops/min at 260 bar |
| Weight |
2.33 lbs (with coil), 1.56 lbs (without coil)
1.06 kg (with coil), 0.71 kg (without coil) |
| Coil Type |
EC-23C |
| Power Consumption |
17W |
This is a pilot-operated, spool type, normally closed electro-proportional throttle valve. It designed for applications requiring essentially zero leakage blocking and load-holding. This valve is similar to a check valve when de-energized. Allow free flow from port 1 to port 2 and block flow from port 2 to port 1. In energized condition, this valve is allowed flow from port 2 to port 1, but it is difficult to pass that flow from port 1 to port 2.
-
Coils must be ordered separately.
-
Continuous-duty rated coil.
-
Efficient wet-armature construction.
-
Working parts are heat-treated and high-precision ground to increase hardness for long life and essentially zero leakage.
-
A variety of seal kit materials for different applications, see seals information under Technical Reference.
-
Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is “90/90”.
-
WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
-
Winner guarantees that all products performance a 100% functional test before shipment.
