Note: Data may vary by configuration. See CONFIGURATION section.
| Cavity |
13A-2 |
| Rated Flow |
15.85 gpm
60 L/min |
| Maximum Operating Pressure |
5000 psi
350 bar |
| Valve Hex Size |
7/8 in.
22.22 mm |
| Valve Installation Torque |
30 - 37 lbf-ft
40 - 45 Nm |
| Adjustament Screw Internal Hex Size |
5/32 in.
4 mm |
| Locknut Hex Size |
9/16 in.
14.27 mm |
| Locknut Torque |
30 - 37 lbf-ft
40 - 50 Nm |
| Response Time-Typical |
2 ms |
| Maximum Leakage Approximately |
0.3 cc/min at 1000 psi
0.3 cc/min at 70 bar |
| Weight |
0.46 lbs
0.21 kg |
This is an atmospherically referenced, direct-operated, poppet-type sequence valve with a reverse check valve function. This valve is used to sense pressure at port 1 and then open to supply flow to a secondary circuit once a predetermined pressure is reached. When the pressure at port 1 exceeds the valve setting, the poppet opens and allows flow from port 1 to port 2. The check valve section allows reverse flow from port 2 to port 1. Pressures at port 1 and port 2 do not affect the spring pressure setting.
- Working parts are heat-treated and high-precision ground to increase hardness for long life.
- A variety of seal kit materials for different applications, see seals information under Technical Reference.
- Winner's cartridges pressure rating tested to the standard of the NFPA specification T2.6.1 and the fatigue rating's assurance and verification level is "90/90".
- WINNERcoat® Zinc-Nickel Plating is salt spray tested in accordance with DIN EN ISO 9227 for up to 1000 hours.
- Winner guarantees that all products performance a 100% functional test before shipment.
